Grout 105

Grout 105 is a dry pre-blended grout that is resistant to chloride penetration consisting of a blend of natural cement based binder, specially selected dried graded aggregates all passing a 3500 micron sieve and retarders.

• Yield: Generally 960 kg/m³ of powder with a water/powder ratio of 14% will result in a bulk density of 2010 kg/m³

• Pricing: Please contact us for a free quotation

 

Product Description

Grout 105 is a blend of a Natural Cement, Portland Cement, food grade retarders specially blended aggregates and plasticisers. It is a high strength grout to be used as a rod anchorage grout, for setting holding down bolts, grouting under base plates, repairs around sewers and as a high strength overlay screed.

The product only requires to be added to water (see mixing instructions for further details), can be used in cold & wet conditions and sets under water. It is supplied as a special product with a minimum order of 5 tonnes.

 

Recommended Uses

• Chemical resistance

• Rod anchorage grout

• Grouting under base plates

• Setting holding down bolts

• Injection grout for waterproofing

• Ground stabilisation

• Void filling

• Grouting to sewers

• Self-levelling screed

• Resistance to sea water where the resistance to chemicals and sea water is required

 

Sectors

• Utilities

• Construction

• Civil Engineering

• Railways

• Sea Defence

• Mining

Product Advantages

• Excellent adhesion

• Low shrinkage

• Excellent resistance to pure water & sulphated water

• Excellent resistance to aggressive chemicals

• Very good cohesion & mixing

• Fine compact surface

• No curing membrane necessary

• Can be used in wet conditions

• Can be used under water

• Controlled setting

• Fine particle size for greater penetration

• Set down to zero

 

 

Natural Cement Product Range

NATCEM 35	NATCEM AC	NATCEM D	NATCEM DW
NATCEM Tank	NATSEAL	Grout 105	CWG Grout
LUL RapideSet	ShotCrete AS90	ShotCrete 430F	ShotCrete 437F
ShotCrete 513	ShotCrete 530	TrackCrete	WaterStop

 

Related Product Videos

The following videos feature NATCEM 35 - please refer to the product data sheet for full instructions regarding the use of Grout 105

 

Surface Preparation

Please refer to the product data sheet or contact us for advice.

 

Mixing

Please refer to the product data sheet or contact us for advice.

 

Application

Please refer to the product data sheet or contact us for advice.

 

Cleanup

Grout 105 should be removed from tools and equipment with water immediately after use.

 

Storage

Grout 105 is packaged in a polythene inner bag with a resealable tie within a stitch sealed woven polypropylene outer bag, which should be stored in dry conditions and will last for at least twelve months.

 

Precautions

We strongly recommend the use of gloves, goggles and mask. Please see the product safety data sheet or contact us for full details.

 

Contact Us

For further advice regarding the use of this product, technical support or a quotation please contact us.