Fosroc Conbextra GP
Conbextra GP is used for free flow non shrink cementitious grouting of gap thicknesses 10 to 75 mm, it can be used for a wide range of applications.
A general purpose high strength non-shrink grout for filling gaps beneath steelwork baseplates, installing starter bars, anchoring reinforcement steel bars, fixing tie bars, filling joints between pre-cast concrete panels, bedding and other general grouting applications. Can be mixed from A trowelable to flowable consistency.
AREAS OF USE:
- Stanchion baseplates
- Joints between pre-cast concrete panels
- Grouting applications where pouring access is restricted
- Anchoring or reinforcing steel bars
- Installation of tie bars
- Conbextra GP is non shrink, high strength, chloride free and can be used at flow-able or trowel-able consistency
4.0 – 4.5 litres to 25kg bag – yield approx. 13.25 litres
3.4 – 3.6 litres to 25kg bag – yield approx. 12 litres
Initial set approx. 6 hours.
A data / instruction sheet will be supplied with your order.
Please take care when using this product and wear appropriate PPE – gloves, protective eye-goggles etc.