Barpimo Clear Natural Wood Varnish (Hydrobarp Care Nature Matt)

Barpimo Clear Natural Wood Varnish (Hydrobarp Care Nature Matt) is a single component, water-based clear topcoat creating a natural/nude effect to your finished project.

• Pack Size: 5 kg

• Colour: Clear

 

Product Description

Barpimo Clear Natural Wood Varnish (Hydrobarp Care Nature Matt) is ideally suited for pine, oak, ash, common walnut, beech, etc. furniture and carpentry (wardrobes, shelves, wood cladding, boards, etc.) where the beauty of the wood needs presentation and ultimate protection.

 

Product Advantages

• High level of hardness and physical resistance.

• Excellent transparency

• High covering power

• Good thixotropy which facilitates vertical application

• Short drying times

• Unlimited pot-life - subject to correct storage

• Non-flamability

• Low odour

• Simplicity of use

• Ready to use

 

• The Advantages of Using Water Based Coatings

One-pack water-based coatings, especially wood coatings for interiors, have no pot life. This therefore removes problems associated with traditional solvent-based polyurethane products.

They are simple and practical coatings because they are easy to work with. Ready to use and the product can be recovered and reused. This is provided it is reintroduced into its original tin and carefully closed - air tight.
Prolonged contact with air must always be avoided.

Water-based coatings are normally applied by spray, roller or brush, this ensures you have an easy application process of choice.

Application Remarks;

                     Process; spray only

• Finish for painting onto primers from the Hydrobarp line

• On a coat of perfectly dry and sanded Hydrobarp Fondo Care apply the product in the specified grammage and cure it in the conditions set

• Topcoat suitable for painting over Fondipol 450 in a mixed system

• If you wish to shorten drying time, you can force-dry with hot air or use infrared or microwave driers.

• If repainting is required after applying the first topcoat, gently sand to achieve adherence between coats

 

Remarks

• Shake contents of containers before use

• Clean utensils with water immediately after use.

• Do not store at below 5ºC

• For toxicological standards, consult the Safety Data Sheet

 

Safety

Please refer to the Product Data Sheet and Safety Data Sheet or contact us for advice.

 

Contact Us

For further advice regarding the use of this product, technical support or a quotation please contact us.