FasTop MultiPrimer

PRODUCT DESCRIPTION

FasTop Multi Primer is a water-based polyurethane cement based primer designed for use with FasTop screeds and self-levelling systems. The material uses common resin, hardener and aggregate to maintain flexibility in stock for the customer and delivers the bonding performance and properties that FasTop is known for. It can be applied by roller, brush or squeegee depending on the requirements.

ADVANTAGES

• Ease of application 
• Excellent adhesion 
• Hygienic
• Versatile

RECOMMENDED USE

A wide range of industrial applications such as: 

• Concrete primer and sealer 
• As a primer for Sherwin-Williams FasTop floor screeds and self-levelling systems

MIXING AND APPLICATION

Mixing: Add the FasTop Multi Base Part A pouch to a mixing bucket then add the FasTop T150 Aggregate slowly whilst mixing until a smooth mixture is obtained that is free from lumps. Add the FasTop Multi Hardener Part B half size pouch and mix for approximately one minute until a homogeneous mix of all components is achieved. Note: Some hardener may be added during the aggregate mixing to ensure the mixture flows and mixes consistently. FasTop Multi Primer should be applied immediately after mixing to prepared areas.. Application FasTop Multi Primer should be applied at the required rate as soon after mixing as possible. (Delay can result in variation in surface finish, colour and add to application problems). Apply FasTop Multi Primer by medium nap roller, brush or squeegee. Work the primer well into the surface ensuring it is fully wetted out and then roll to complete an even coating without any ponding. Two coats may be required to eliminate any dry patches and to create an even sealed surface. The primer should be worked into and around the anchor joints, cut for FasTop screeds being installed, whilst avoiding to filling these with resin. See Sherwin-Williams FasTop System Guides for recommended floor systems.