Rust-oleum 5190 Epoxy Deep Fill Repair Mortar

Very strong epoxy repair mortar for quick and economical repair of large or deep holes in concrete floors.

• Pack Size: 25kg

--

 

Rust-oleum 5190 Epoxy Deep Fill Repair Mortar

Rust-oleum 5190 Epoxy Deep Fill Repair Mortar is a very strong, cost-effective epoxy repair mortar for quick and economical repair of large or deep holes in concrete floors.

Pack Size: 25kg

 

Product Characteristics

• Economical repair of deep or large holes in concrete floors

• Repair deep holes of 15 – 100 mm

• Does not shrink or crack

• Easy all-in-1 packaging

• For interior and exterior use

• Contains no solvents

• Can be recoated quickly

 

Surface Preparation

Concrete surfaces should be dry and free from previous coatings, contaminants and loose material and at least four weeks old. Very smooth concrete or concrete with soft laitance should be abraded to provide a physical profile. Grease or oil should be removed with ND14 Cleaner/Degreaser and the area thoroughly washed off and allowed to become completely dry.

 

Directions for Use

The pack contains a granular resinous material and one bottle of curing agent. Mix the granular resinous material with the curing agent on a board. It is important that mixing should be carried out very thoroughly. The ratio of resin to curing agent is critical and the mixing of part packs is not recommended.

 

Application Conditions 

Temperature of material, air and substrate between 10°C - 35°C and relative humidity below 85%. The substrate temperature must be at least 3°C above dew point.

 

Application and Thinning

Rake/Trowel

The mortar should be troweled firmly against the substrate. It should be overlaid with Epoxy Repair Mortar 5180 in very heavy wear areas or where the thickness of the repair is less than 15 mm.

The Deep Fill mortar has a textured surface and should be overlaid with Epoxy Repair Mortar 5180 if a smoother surface is required. The working life of the mixed product is half to one hour depending on temperature. If the product is used past its working life, troweling will become difficult and adhesion reduced.

 

Cleanup

Clean equipment and spills using Rust-Oleum Thinner 160.

 

Remarks

Curing time will be extended by low temperatures. Temperatures of 10°C and below will arrest the curing of the product.

 

Contact Us

For further advice regarding the use of this product, technical support or a quotation please contact us.