Masteremaco T545

Rapid setting trafficable repair mortar.

• Available in a 25kg unit.

--

 

Rapid setting trafficable repair mortar.

PRODUCT DESCRIPTION;

MasterEmaco T 545 is a one component concrete repair and anchoring material which sets in 15 minutes and will accommodate rubber-tyre traffic 45 minutes after placement. This product bonds to both concrete and masonry and can be used indoors and outdoors for highway and heavy industrial repair jobs.

PRODUCT ADVANTAGES;

Rapid Installation

Flexible

Protein Free

Fast Drying and Setting

SUBSTRATE REQUIREMENTS;

Concrete or screed substrate should be a minimum of 25 N/mm2, free from laitance, dust and other contamination. The substrate should be dry to 75% RH, tested in accordance with BS8203 and free from rising damp and ground water pressure. If above 75% RH, or no damp proof membrane is present Hydraseal DPM can be incorporated directly beneath the Isocrete 1500 (Novus) system, enabling the immediate installation of floor finishes once the screed has dried.

PACK SIZE;

20kg units.

SURFACE PREPARATION;

Surfaces should be structurally sound, clean, and free from loose particles, oil, grease, cement laitance, mold release agents, curing membranes, and other contaminants must be removed by wet grit blasting, high pressure water jetting (approx.150 bars) or such other effective methods.

Surface carbonation inhibits chemical bond. Apply an indicator to the prepared surface to determine if carbonation is present
To obtain permanent type repairs the edge of the patch should be square cut and to a depth of not less than 10mm.